|
Product Details:
Payment & Shipping Terms:
|
| Matrial: | Alloy Steel | Standard: | GB, ASTM, DIN,JIS |
|---|---|---|---|
| Grade: | 1030 (G10300) / S30C | Diameter: | 4-1600mm |
| Length: | Below 16 Meters | Shape: | Round Bar |
| Techniques: | Cold Drawn; Hot Rolled; Cold Rolled; Forged | Surface: | Black, Bright, Polished, Peeled, Or Upon Request |
| Ultrasonic Test: | 100% UT Passed | Processing: | Annealed Or Quenched And Tempered Provided |
| End: | Beveled, Plain End As Required | Quality Inspection: | SGS, BV Etc. |
| Service: | Cutting Service And 3rd Party Inspection Is Provided | ||
| High Light: | hot rolled round bar,spring steel round bar |
||
INTRODUCTION
AISI 1030 is a high-carbon steel containing approximately 0.30% carbon that can be hardened by heat treatment to a maximum hardness of approximately Rockwell C 50. Soft annealed high carbon steel is intended for applications requiring moderate forming, while soft spheroidized annealed product is intended for applications requiring maximum cold forming. The soft spheroidized annealed product is processed to give the lowest hardness for maximum formability.
Applications of AISI 1030 Steel
This grade of steel is used for machinery parts, brackets, brakes, clips, clutches, springs, washers and for a wide range of applications that can make use of its good combination of mechanical properties.
-Dimension: Diameter 4-1600 mm, any length below 16 meters
-Delivery Conditions:
Cold drawn: 4-100 mm
Peeled: 30-160 mm
Grinded: 4- 600 mm
Turned: 130-1200 mm
Hot rolled: 12-320 mm
Hot forged: 130-1600 mm
-EAF+(ESR) or EAF+LF+VD+(ESR)
-HOT rolled; Cold rolled; Forged; Cold Drawn
-Heat Treatment: Untreated, Annealing, N+T, Q+T
-Smelting: EAF+LF+VD (+ESR)
-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request
-UT 100% passed
-Cutting service provided
-Third Party inspection is acceptable (SGS, BV etc.)
Standard
ASTM A213; ASTM A335; ASTM A519; ASTM A106; ASTM A29; JIS G3462; JIS G3458; JIS G3444; JIS G4053; DIN17175; DIN1629; DIN2391; GB/9948, GB/6479; GB/T8162; GB/T8163; GB/T 3077; EN 10297; EN 10084; EN 10083; ISO 683/11; IOS 683/10; IOS 683/1; etc.
Equivalent grades of steel AISI 1030
| ASTM A29/M | BS | JIS | China GB |
Inter ISO |
| 1030 | 060A30 | S30C | 30 | C30E4 |
Chemical Requirements, Composition, %
| Grade | Carbon | Manganese | Phosphorus | Sulfur | Silicon |
| AISI 1030 | 0.28–0.34 | 0.60–0.90 | 0.040 max | 0.050 max | 0.10 max |
Mechanical properties
| Standard | Steel Grade | Yield strength MPa (>=) | Tensile strength MPa (>=) |
Elongation % (>=) |
Reduction of area % (>=) | Hardness HB |
| ASTM A29 | 1030 | 440 | 524 | 12 | 35 | 149 |
Quality Assurance
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
PROCESSING
Machinability
The machinability rating of AISI 1030 carbon steel is 70.
Forming
The formability of AISI 1030 carbon steel in the annealed condition is good.
Welding
AISI 1030 carbon steel can be welded by all welding methods. It is advisable to pre-heat the heavy sections of this steel at 149 to 260°C (300 to 500°F) and then post-heat at 593 to 649°C (1100 to 1200°F) for welding.
Heat Treatment
AISI 1030 carbon steel is heat treated at 816 to 871°C (1500 to 1600°F) and quenched in water. This process is followed by a tempering treatment.
Forging
AISI 1030 carbon steel is forged at 982 to 1260°C (1800 to 2300°F).
Hot Working
Hot working of AISI 1030 carbon steel is performed at 93 to 482°C (200 to 900°F).
Cold Working
In the annealed condition, cold working of AISI 1030 steel may be performed by conventional methods. After annealing, a full or stress relief anneal may be required.
Annealing
Annealing of AISI 1030 carbon steel is carried out at 871 to 982°C (1600 to 1800°F) and then slow cooled in the furnace. Stress relief annealing may be carried out at 538°C (1000°F).
Hardening
AISI 1030 carbon steel is hardened by heat treatment or cold working.
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Shape Available
Our Advantages
OUR MAIN PRODUCTS ARE LISTED AS BELOW
Notes:
Available Size:
-Round: Dia. 4 -1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
COMPANY INFORMATION
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
CONTACT US
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Your Contact Person
Ms Chilli Ho
Phone/Wechat/Whatsapp +86-181-0187-5575
Skype: chilli.ho@outlook.com
Email: chilli.ho@shunitesteel.com
Contact Person: Neya
Tel: +8615261689453
