Payment & Shipping Terms:
|Length:||Below 16 Meters||Standard:||GB, ASTM, DIN,JIS|
|Grade:||D6 / 1.2436||Diameter:||20-1000mm|
|Matrial:||Tool Steel||Shape:||Round Bar|
|End:||Beveled, Plain End As Required||Techniques:||Cold Drawn; Hot Rolled; Cold Rolled; Forged|
|Surface:||Black, Bright, Polished, Peeled, Or Upon Request||Ultrasonic Test:||100% UT Passed|
|Processing:||Annealed Or Quenched And Tempered Provided|
tool steel rod,
tool steel round bar
AISI D6 / DIN 1.2436 Cool Work Tool Steel Bar / Rod Dia 20-1000mm
DIN 1.2436 is a kind of cold work tool steel with excellent wear resistance and edge holding ability. High surface hardness after heat treatment. Medium toughness, but high compressive strength, and good through hardening properties and dimensional stability.
Tool steel round bar DIN 1.2436 is for making cutting and drawing tools for high wear resistance, rolls with high dimensional stability, deep drawing tools, tools of wire, bar and tube production, cold shear blades for thin sheets.
|Steel Grade||1.2436||Application||Tool steel, Mold Steel|
|Shape||Round Bar||Standard||GB, ASTM, DIN,JIS|
|Dimension||Φ20-1000 mm; length below 16m||Surface||Black, Bright, Polished, Peeled|
|Technique||Cold drawn; Hot rolled; Forged||Ultrasonic Test||100% UT Passed|
-EAF+(ESR) or EAF+LF+VD+(ESR)
-HOT rolled; Cold rolled; Forged; Cold Drawn
-Heat Treatment: Untreated, Annealing, N+T, Q+T
-Smelting: EAF+LF+VD (+ESR)
-Surface Finish: Black, Rough Machined, Peeled, Turned or as per given requirements
-UT 100% passed
-Cutting service provided
-Third Party inspection is acceptable (SGS, BV etc.)
CHEMICAL COMPOSITION (%)
-Slow controlled cooling in furnace at a rate of 10-20℃/hr down to approx.600℃, further cooling in air.
-Hardness after annealing: max. 250 HB
-650 to 700℃
-Slow cooling in furnace; intended to relieve stresses set up by extensive machining, or in-complex shapes.
-After through heating, hold in neutral atmosphere for 1 to 2 hours.
-950 to 980℃
-Oil, salt bath (220 to 250℃ or 500 to 550℃), air plast, still air.
-Holding time after temperature equalization: 15 to 30 minutes.
-Obtainable hardness: 64 -66 HRC. Approx. 61 HRC if followed by nit-riding.
-Special treatment: Hardening 1020℃ and tempering at 500℃.
-Slow heating to tempering temperature immediately after hardening/time in furnace 1 hour for each 20 mm of work piece thickness but at least 2 hours/cooling in air.
-For average hardness figures to be obtained please refer to the tempering chart.
-For certain cases we recommend to reduce tempering temperature and increase holding time.
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
OUR MAIN PRODUCTS ARE LISTED AS BELOW
-Round: Dia. 20-1000 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Contact Person: Neya