Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
SHANGHAI UNITE STEEL
Home ProductsStainless Steel Bar

DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape

China SHANGHAI UNITE STEEL certification
China SHANGHAI UNITE STEEL certification
I'm Online Chat Now

DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape

DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape
DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape

Large Image :  DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape

Product Details:
Place of Origin: MAINLAND CHINA
Brand Name: UST
Certification: ISO 9001:2008
Model Number: ASTM 410/410S/410HT GB/T 1Cr13
Payment & Shipping Terms:
Minimum Order Quantity: 1 Metric ton
Price: USD 1250-3500 / Metric Ton
Packaging Details: In standard export packing and seaworthy material with rectangular shape bundle, covered with tarpaulin, in ontainers or in bulk, or upon request
Delivery Time: 15-35 days
Payment Terms: L/C, T/T, D/A, D/P
Supply Ability: 1000 Metric Tons per Month
Detailed Product Description
Matrial: Stainless Steel Standard: GB, ASTM, DIN,JIS
Grade: 410/410S/410HT/1Cr13 Diameter: 4-800mm
Length: Any Length Below 10 Meters Shape: Round Bar
Techniques: Cold Drawn; Hot Rolled; Forged Surface: Black, Bright, Polished, Peeled, Or Upon Request
Ultrasonic Test: 100% UT Passed Processing: Annealed Or Quenched And Tempered Provided
End: Beveled, Plain End As Required Quality Inspection: SGS, BV Etc.
Service: Cutting Service And 3rd Party Inspection Is Provided
High Light:

stainless round bar

,

stainless steel round bar

INTRODUCTION

 

Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it’s been hardened, tempered, and then polished.

 

Alloy 410 HT is the basic, general purpose, heat treated version of Type 410. It used for general purpose, where corrosion is not severe.

 

Alloy 410S is a low carbon, non–hardening modification of Alloy 410 and contains 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.

 

APPLICATIONS

 

 

Applications requiring moderate corrosion resistance and high mechanical properties are ideal for Alloy 410/ 410HT. Examples of applications that frequently used Alloy 410/ 410HT include:

  • Cutlery
  • Steam and gas turbine blades
  • Kitchen utensils
  • Bolts, nuts, screws
  • Pump and valve parts and shafts
  • Mine ladder rugs
  • Dental and surgical instruments
  • Nozzles
  • Hardened steel balls and seats for oil well pumps

Examples of applications that frequently used Alloy 410S include:

  • Petroleum Refining and Petrochemical Processing
    • Columns
    • Distillation trays
    • Heat exchangers
    • Towers
  • Ore Processing
    • Mining machinery
  • Thermal Processing
    • Annealing boxes
    • Partitions
    • Quenching racks
  • Gate valves
  • Press plates

Steel Grade 410/410HT/410S Application Mentioned above
Shape Round Bar Standard GB, ASTM, DIN,JIS
Dimension Φ4-800 mm; length below 10m Surface Black, Bright, Polished, Peeled
Technique Cold drawn; Hot rolled; Forged Ultrasonic Test 100% UT Passed

 

DELIVERY CONDITIONS

 

  Diameter (mm)
Cold drawn 4-60
Peeled 30-100
Grinded 4-600
Turned 130-800
Hot Rolled 20-280
Hot Forged 130-800

 

EQUIVALENT GRADES OF ASTM 410 / 410S

  • JIS G4303: SUH410/SUS410S
  • ASTM/ASME: UNS S41000/ UNS S41008
  • EURONORM: X12Cr13/ X6Cr13
  • DIN: 1.4006/ 1.4000

 

CHEMICAL COMPOSITION (%)

 

  C Si Mn P S Cr Ni
410/410HT

0.15

1.00

1.00

0.040

0.030

11.50

13.50

0.50

410S

0.08

1.00

1.00

0.040

0.030

11.50

13.50

0.60

1Cr13 / 12Cr13

0.08

0.15

1.00

1.00

0.040

0.030

11.50

13.50

0.60

 

MECHANICAL PROPERTIES

Grade Tensile Strength ksi (min) Yield Strength 0.2% ksi (min) Elongation % Hardness (Brinell) MAX Hardness (Rockwell B) MAX
410/410HT

65(450)

30(205) 20 217 96
410S 64.4(444) 42(290) 33 183 75
1Cr13 / 12Cr13 540 345 20   200

 

 

RESISTANCE

Corrosion Resistance of 410/410HT:

  • Good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive environments
  • Its exposure to everyday activities (sports, food preparation) is generally satisfactory when proper cleaning is performed after exposure to use
  • Good corrosion resistance to low concentrations of mild organic and mineral acids

Resistance of 410S

Oxidation Resistance

  • Good oxidation resistance.
  • Can be used in continuous service up to 1300°F (705°C).
  • Scaling becomes excessive above 1500°F (811°C) in intermittent service.

Corrosion Resistance

  • Corrosion resistance of 410S stainless steel is similar to type 410.
  • Resists corrosion in atmospheric conditions, fresh water, mild organic and mineral acids, alkalis and some chemicals.
  • Exposure to chlorides in everyday activities (e.g., food preparation, sports activities, etc.) is satisfactory when proper cleaning is performed after exposure to use.

 

COMMON PROCESSING

 

Welding Characteristics

  • Readily welded by all standard methods
  • To reduce the risk of cracking, it is suggested to pre-heat the work piece to 350 to 400oF (177 to 204oC)
  • Post weld annealing is recommended to retain maximum ductility

Heat Treatment

  • The proper hot work range is 2000 to 2200oF (1093 to 1204oC)
  • Do not work this material below 1650oF (899oC)

Processing of 410S

Heat Treatment

The alloy can not be hardened by heat treatment. It is annealed between 1600 – 1650°F (871 – 899°C), and then air cooled to relieve cold working stresses. 410S should not be exposed to temperatures above 2000°F (1093°C), due to embrittlement. If large grains are found after annealing mildly cold-worked material, the annealing temperature should be decreased to 1200 – 1350°F (649 – 732°C).

Welding

410S is generally considered to be weldable by the common fusion and resistance techniques. Special attention should be given to avoid brittle weld fractures during fabrication; this includes minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part somewhat before forming. 410S is generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade 409. A major difference can be attributed to the addition of alloy, to control hardening which results in the need for higher heat input during welding.

 

DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape 0

 

What we can offer?

-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.

-Machining and heat treatment are available.

-Also, we advise you in choosing the right materials.

 

Shape Available

  • Solid round bar
  • Flat bar
  • Square bar
  • Hexagon bar
  • Block
  • Plate
  • Sheet
  • Wire rod
  • Strip

 

Our Advantages

  • High mechanical property and quenching, enable the surface share equal hardness after deal with it
  • Good polishing and low roughness
  • Making the heat-treatment to harden condition before using it
  • Competitive price
  • Fast production lead-time
  • All the material are inspected with 3 times to meet the highly standards
  • Pure steel quality & stable quality to be guarantee
 

OUR AVAILABLE STAINLESS STEEL PRODUCTS ARE AS BELOW

DIN Standard Stainless Steel Bar Length Below 10 Meters Round Shape 1

 

PAYMENT AND SHIPPING

 

1. Both T/T and L/C will be acceptable

2. Trade Terms: FOB, CIF, CFR

3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties

4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples

 

COMPANY INFORMATION

 

Shanghai Unite Steel Trading Co., Ltd

We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.

In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.

What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!

 

FAQ

 

Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.

Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.

Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.

Q: What is the payment term?
A: T/T or L/C.

Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.

 

CONTACT US

 

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

 

Your Contact Person

Ms Chilli Ho

Phone/Wechat/Whatsapp +86-181-0187-5575

Skype: chilli.ho@outlook.com

Email: chilli.ho@shunitesteel.com

Contact Details
SHANGHAI UNITE STEEL

Contact Person: Eric

Tel: 13661534998

Send your inquiry directly to us (0 / 3000)