Payment & Shipping Terms:
|Production Technique:||Hot Rolled||Surface:||Black, Polised, Oiled, Painted Ect.|
|Inspection:||BV, SGS Are Accepted.||Material:||Carbon Steel|
Cold Drawn Tube,
Drawn Steel Tube
ASTM A519 1010 Hot Rolled Steel Tube , Carbon Steel Seamless Pipes For Mechanical Use
Carbon steel seamless steel pipe is kind of long steel. Steel pipe has hollow section, which is widely used as pipeline for conveying fluids, such as oil, natural gas, gas, water and some solid materials. Compared with solid steel such as round steel, steel pipe is lighter in weight under the same bending and torsional strength. It is an economic section steel. It is widely used in manufacturing structural and mechanical parts, such as oil drill pipe, automobile transmission shaft, bicycle frame and steel scaffolding used in construction.
ASTM A519 GR. 1010 Hot Rolled Seamless Steel Tube is low Carbon Steel Tube, which is one of the most commonly used steel pipes for general purpose applications worldwide.
It has good weld ability and forming and extruding chrematistics. It also has exceptionally simple and robust mechanism, self-cleaning and non-clogging mechanism, power saving, maintenance free, big solid handling capability, and as well as the quality for enduring reliable longer life and performance. 1010 tubing is often used for general structural and automotive bodies.
The low carbon steels, such as 1010, are used for applications such as cold headed fasteners and bolts.
Cold Drawn: 6-426mm OD; 1-40mm WT
Hot Finished: 32-1200mm OD; 3.5-200mm WT
|Pipe End||Plain / Beveled / Vanished / Plastic Caps|
|Coating||Black / Galvanised / 3LPE / Turned / Peeled / Grinded / Polished / Anti – Corrosion Oil|
|Length||15 Mtr max Cut to Length available|
|Heat Treatment||Spheroidizing / Full Annealing / Process Annealing / Isothermal Annealing / Normalizing / Quenching / Martempering (Marquenching) / Quench And Tempering / Austempering|
|Application||Oil & Gas / Hydro Carbon Process / Automotive / Boiler, Heat Exchanger / Plumbing, HVAC & Firefighting / Structural / General Engineering / Railways / Sewage & Waterwell|
|Quality Inspection||Third Party inspection is acceptable (SGS, BV etc.)
TOLERANCE FOR SEAMLESS TUBING
|I.D tolerance (mm)||O.D tolerance (mm)||Straightness (mm)|
Relavent Standard & Grades Equivalency
-ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing
-EN 10297-1 Seamless Circular Steel Tubes for Mechanical and General Engineering Purpose
-DIN1629 Seamless Circular Tubes of Non-alloy Steels with Special Quality Requirements
-JIS G3444 Carbon Steel Tubes for General Structural Purposes
-JIS G3445 Carbon Steel Tubes for Machine Structural Purposes
|Standard||ASTM A519||EN 10297||JIS G3444||GB/T 8162|
Chemical Requirements, Composition, %
|Standard||Steel Grade||Yield strength MPa (>=)||Tensile strength MPa (>=)||
|Reduction of area % (>=)||Hardness Rockwell B|
Machinability of 1010 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel 1112 as a reference that is considered 100% machinable (easily machined) the 1010 steel has a rating of 55%.
Formability of 1010 steel is good. The alloy has good ductility and is readily formed by conventional means.
1010 steel may be welded by all of the standard welding techniques.
This steel is generally used in the annealed or case hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result.
Forging may be done in the range of 2300 F down to 1800 F.
The alloy may be hot worked in the range of 900 F to 200 F.
1010 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed.
A full anneal is done at 1600 to 1800 F followed by slow cooling in the furnace. A stress relief anneal may be done at 1000 F and slow cooled. In the full annealed condition 1010 steel has a tensile strength of about 45 ksi.
Tempering may be done, after hardening, at 600 to 1100 F depending upon the strength level desired. Tempering at 1000 F will give a tensile strength on the order of 75 ksi.
Hardens by cold working or heat treatment. Check the above "Heat Treatment" and "Tempering".
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
In standard export packing and seaworthy material with hexagon shape bundle, covered with tarpaulin, in containers or in bulk, or upon request
Payment & Delivery
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Contact Person: Eric