Payment & Shipping Terms:
|ProductHydraulic Cylinder:||Alloy Steel Tube P91||Technique:||Hot Rolled|
|Quality Standard:||ASTM A335; DIN 2391; JIS G3441; Etc.||Surface:||Black, Bright, Smooth,etc.|
|Delivery Conditions:||BKS, NBK,BK ,BKW, GBK(+A), NBK(+N), BK(+C)||Inspection:||SGS, BV Etc.|
|End:||Plain / Beveled / Vanished / Plastic Caps|
Steel Round Tube,
Round Steel Tubing,
Boiler Steel Tube
ASTM A335 GRADE P91 HOT ROLLED ALLOY STEEL SEAMLESS PIPES/TUBES
A335/SA335 P91 is a ferritic alloy steel that has very high strength properties, which do not deteriorate with time, and are creep resistant. It is also called 9 Cr 1 Mo steel, or chrome moly pipe, based on its composition.
Compared to its predecessors, the T22 or P22 grade, grade P91 exhibits high strength, enduring temperatures up to 600 °C. The oxidation temperature limits are also higher allowing elements to be engineered with less thickness. This contributes to an almost 10 times higher thermal fatigue life and allows engineers to increase the operating temperature to a higher level, increasing efficiency.
P91 typically allows a wall thickness reduction by at least a 2-to-1 ratio. A wall that is thinner creates lighter hanger loads, less welding time and uses less filler metal.
These advantages are enabled by this steel’s high amount of chromium. Grade 91 contains 9% chromium and 1% molybdenum compared to 2.5% chromium in the next best P22 grade.
A335/SA335 P91 is suitable for bending, flanging (vanstoning), and similar forming operations and for fusion welding. P91 is most commonly used in the power industry and petrochemical plants where fluids and gases are transported at extremely high temperatures and pressures.
P91’s strength and high temperature endurance makes it ideally suitable for plants that operate on a cyclic basis - like combined cycle plants. Also, the reduction in thickness suits HRSG designers, in an HRSG the temperature head is limited and locating the coils in the heat transfer path is very critical.
P91 is the correct grade for:
|Pipe End||Plain / Beveled / Vanished / Plastic Caps|
|Coating||Black / Galvanised / 3LPE / Turned / Peeled / Grinded / Polished / Anti – Corrosion Oil|
|Length||15 Mtr max Cut to Length available|
|Heat Treatment||Spheroidizing / Full Annealing / Process Annealing / Isothermal Annealing / Normalizing / Quenching / Martempering (Marquenching) / Quench And Tempering / Austempering|
|Application||Oil & Gas / Hydro Carbon Process / Automotive / Boiler, Heat Exchanger / Plumbing, HVAC & Firefighting / Structural / General Engineering / Railways / Sewage & Waterwell|
|Quality Inspection||Third Party inspection is acceptable (SGS, BV etc.)|
TOLERANCE FOR SEAMLESS TUBING
|I.D tolerance (mm)||O.D tolerance (mm)||Straightness (mm)|
Relevant Standard & Grades Equivalency
-ASTM A335 Standard Specification for Seamless Ferritic Alloy Steel Pipe for High -Temperature Service
-EN 10297-1 Seamless Circular Steel Tubes for Mechanical and General Engineering Purpose
-DIN2391 Seamless Precision Steel Tubes
-JIS G3441 Alloy Steel Tubes for Machine Purposes
Chemical Requirements, Composition, %
|ASTM A335||P91||0.08-0.12||0.20-0.50||0.30-0.60||0.020 max||0.010 max||8.00-9.50||0.85-1.05|
Chromium, or chrome, improves high-temperature strength and increases oxidation resistance. It is virtually irreplaceable in resisting oxidation at elevated temperatures. Chrome also raises the tensile, yield and hardness at room temperatures.
Molybdenum increases the strength, elastic limit, resistance to wear, impact qualities and hardenability. It increases the resistance to softening, restrains grain growth and makes chromium steel less susceptible to embrittlement. Moly is also the most effective additive for increasing high temperature creep strength, or creep resistance. It also enhances the corrosion resistance of steel and inhibits pitting.
Also present are smaller quantities of nickel and manganese which increase the hardenability of the steel.
The addition of Vanadium (V) and Columbium/Niobium (Cb/Nb) as well as the control of Nitrogen (N) greatly Improves Creep Strength.
More important than the alloying elements is the formation of this alloy steel. The steel is formed by normalizing at 1050 °C, then air cooling down to 200 °C. It is then tempered by heating to 760 °C. The temperatures and cooling rates produce the microstructure that results in the high creep strength properties.
|Standard||Steel Grade||Yield strength MPa (>=)||Tensile strength MPa (>=)||
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment of ASTM A335 P91 alloy steel pipe
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
In standard export packing and seaworthy material with hexagon shape bundle, covered with tarpaulin, in containers or in bulk, or upon request
Payment & Delivery
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Contact Person: Eric